TO PREVENT THE 3 IN 1 GEL ENAMEL FROM PEELING OFF, FILE SOFTLY NAILS' SURFACE TO REMOVE IMPERFECTIONS AND CLEAN THEM WITH PURE ACETONE

ENTER THE APP

SELECT THE COLOR

SELECT THE NUMBER OF NAILS TO BE PAINTED DEPENDING ON THE SIZE OF THE NAILS,

FOR LONG NAILS - SELECT 10 NAILS
FOR SHORT NAILS - SELECT 5 NAILS
(THE LAST NUMBER SHADED IN GREEN INDICATES THE MINIMUM AMOUNT OF NAILS TO BE PAINTED DUE TO THE MIXTURE TO OBTAIN THE SELECTED COLOR)

SELECT THE COLOR DISPENSERS INDICATED BY THE APP

TO OBTAIN THE SELECTED TONE, IT IS VERY IMPORTANT TO REMOVE THE EXCESS OF AIR;

UNLOCK THE FIRST DISPENSER FROM THE LOWER PART, REMOVE THE NOZZLE COVER, SELECT NUMBER 5 IN THE DISPENSER, PLACE IT HORIZONTALLY FACING UP AND SLOWLY PRESS IT UNTIL THE PRODUCT BEGINS TO POUR, CLEAN THE NOZZLE AND THEN

SELECT THE NUMBER ON THE DISPENSER THAT THE APP INDICATES (1⁄2, 1, 2, 3, 4, 5)

UNCOVER THE ALUMINUM CONTAINER, PLACE THE DISPENSER HORIZONTALLY WITH THE

TIP FACING DOWN AND PRESS FULLY THE AMOUNT OF DROPS INDICATED BY THE APP

REPEAT THE STEPS 6 TO 8 WITH THE FOLLOWING DISPENSERS

MIX WITH THE BRUSH TO GET THE SELECTED COLOR

APPLY WITH THE BRUSH THE FIRST LAYER IN AN UNIFORM WAY AND DON'T FORGET TO

INCLUDE THE TIP OF THE NAIL TO PREVENT THE GEL ENAMEL FROM PEELING OFF

DRY THE FIRST LAYER WITH THE LAMP (WHICH IS PROGRAMMED WITH THE RIGHT TIME),

PLACING THE FINGERS SO THE LIGHT COVERS THE PAINTED NAILS COMPLETELY

APPLY THE SECOND LAYER FOLLOWING THE INSTRUCTIONS IN STEPS 11 AND 12